Application:

Use together with our mini-submersible pump, you can set up automatic unattended shutdown drainage system for the following broad sectors:
1 General Industrial Equipment and medical equipment;
2 Chemical Equipment, tourist vehicles, special vehicles and ships;
3 Industrial machinery accessories;
4 Agriculture (lawn and garden, etc.);
5 Vehicle cleaning, carpet cleaning, floor cleaning, etc.;
6 Water purification and water treatment equipment.

Functions:

FLOAT SWITCH
SFBS-30-01
Max Amps 12volts: 20A
Max Amps 24volts: 15A
Max Amps 32volts: 12A
Wire Length:1m
Wire gauge size: 18
N.W/N.W: 0.16/0.18

  • Long life, switching frequency up to 10 million times;Ultrasonic welding, forming a seal, reliable and secure, not leaking
  • Turn pump on when water level reaches 2? (51mm) ; Turn pump off when water level reaches 3/4?(19mm)
  • Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop;
  • Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing
  • Heavy duty flow switch is designed for the toughest applications; Environmentally responsible.

Write a review

Note: HTML is not translated!
    Bad           Good

Amarine-made Marine Boat Bilge Pump Float Switch - White

  • Product Code: B00N6HKDII
  • Availability: 20
  • $24.66



Related Products

Amarine-made 1100gph 12v Boat Marine Plumbing Electric Bilge Pumps (1100gph 12v)

Amarine-made 1100gph 12v Boat Marine Plumbing Electric Bilge Pumps (1100gph 12v)

Features: The Amarine-made submersible bilge pumps are toug..

$26.99

Amarine-made Automatic Submersible Boat Bilge Water Pump 12v 750gph Auto with Float Switch-new

Amarine-made Automatic Submersible Boat Bilge Water Pump 12v 750gph Auto with Float Switch-new

Amarine-made automatic bilge pump -750gph Compact, automati..

$28.99

Seaflo 2000 GPH 12v Boat Marine Plumbing Electric Bilge Pumps

Seaflo 2000 GPH 12v Boat Marine Plumbing Electric Bilge Pumps

Product Description This product is 100% brand new and come..

$49.90

Shoreline Marine SL52268-X Bilge Pump 3 Way Switch (Black)

Shoreline Marine SL52268-X Bilge Pump 3 Way Switch (Black)

Varnish custom crafted net with laminated wood frame and nyl..

$22.99

Shoreline Marine Bilge Pump 600 GPH

Shoreline Marine Bilge Pump 600 GPH

Bilge Pump 500 Gallons per hourPumps up to 600 gallons per h..

$22.00

Dynamic Head

The effect of the Earths gravity on the "lift" or head pressure is fairly simple; for every vertical foot of distance the pump moves the water you are adding one foot of head pressure so the ratio is a 1:1 ratio. The effects of the friction, caused by water as it travels through your hose or pipes, on the total head pressure is a little more difficult to calculate especially as there are slight variations in pipe friction in different hose materials and the smoothness of the inner bore. Basically. for every ten feet of pipe through which the water has to travel travel horizontally will contribute 1 foot of head height; the ratio of the pipe friction loss is a 10:1 ratio.

Plumbing fixtures and bends and corners in your hose also increase the total head you must calculate to ensure the proper final volume from your pump. Every corner with a 90 degree elbow in your plumbing will add 1 foot of head pressure  with a 1:1 ratio. 45 degree elbows, tees and even insert couplers can all have an impact on the final flow.

If you install a pump 40 feet away from the top of your waterfall which is 6 feet above the pump and the tubing is a single run of 40 feet horizontally then you add 4 feet of head for the tubing length (the 10:1 ratio) to the 6 foot differnetial between the pump location and the final height of the waterfall so your final total dynamic head calculation would be 10 feet. This means your final volume of water flow in this water feature or application would be the volume of flow on the performance curve that equaled the gallons per hour at 16 feet. This volume will certainly be much less than the initial volume the pump can move at an open flow or a zero head.

If in the above example your 40 feet of horizontal tubing run also required 3 elbows of 90 degrees then an additional 3 feet of theoretical head would be added and your final flow result would be at 19 feet on the performance curve of the pump. In this example you would want to choose a pump that has the desired GPH rating at 9 feet of head pressure.  Tubing size is also an important factor in accounting for head pressure loss, in general you should never reduce the diameter of the tubing below what the output size of the pump is, this will drastically increase head pressure, and reduce pump performance.  For maximum pump performance, using the largest tubing that is practical is the best choice. A best practice is to use a hose with an inner diameter that is the same as your pumps outlet fitting.