• SHURflo 255-313 Classic Series Twist-On Strainer (1/2" FPT x 1/2" )
Designed to connect directly to the inlet of your SHURflo pumps, the transparent design of these strainers allows for easy visual check, while the new convenient bowl allows for fast cleaning. Available in both barb or thread. Replaces: Poly Top/Nylon.
  • SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump
  • Screws directly onto the pump head
  • Transparent design shows when it is time to clean the bowl
  • Easy disassembly, cleaning and reassembly
  • Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
  • 50-mesh SS screen
  • Aftermarket Twist-On Striner 1/2" Pipe Inlet
  • Clear, clean plastic construction makes it easy to see when cleaning is needed. Easy Disassembly for cleaning
  • Keeps debris out of the pump
  • Easy to install to pump head and easy disassembly for cleaning

Write a review

Note: HTML is not translated!
    Bad           Good

SHURflo 255-313 Classic Series Twist-On Strainer (1/2" FPT x 1/2" )

  • Brand: Shurflo
  • Product Code: 255-313
  • Availability: 20
  • $18.21



Related Products

SHURflo 4008-101-E65 3.0 Revolution Water Pump

SHURflo 4008-101-E65 3.0 Revolution Water Pump

A Revolution in 12 VDC RV Water Pumps The design for SHURf..

$113.66 $119.00

TruePower 12V DC Marine Utility Pump

TruePower 12V DC Marine Utility Pump

12 Volt DC Marine Utility Pump, #4830Stainless steel pump bo..

$119.20

Shurflo 182-200 Accumulator Tank

Shurflo 182-200 Accumulator Tank

Pre-Pressurized Accumulator Tank - 24 oz.Specifically design..

$69.60

Shurflo 4008-171-E65 115V 3GPM Revolution Pump

Shurflo 4008-171-E65 115V 3GPM Revolution Pump

SHURFLO REVOLUTION 4008 SERIES PUMP - SHURflo's New Revoluti..

$185.68

Shurflo 4048-153-E75 4048 Series RV Pump

Shurflo 4048-153-E75 4048 Series RV Pump

Automatic demand design eliminates the need for an accumulat..

$230.10

SHURflo 94-231-20 Upper Housing Kit with Pressure Switch

SHURflo 94-231-20 Upper Housing Kit with Pressure Switch

PUMP REPAIR and REBUILD KITS (For 2088/2093 Series). 94-231-..

$29.99 $34.00

SHURflo 234-2926 1/2" FPT X 1/2" Barb Straight Swivel

SHURflo 234-2926 1/2" FPT X 1/2" Barb Straight Swivel

SHURflo 234-2926 1/2 FPT X 1/2 Barb Straight SwivelSHURflo 2..

$8.20

SHURFLO AQUA KING™ II Standard Fresh Water Pump - 12 VDC, 3.0 GPM (56054)

SHURFLO AQUA KING™ II Standard Fresh Water Pump - 12 VDC, 3.0 GPM (56054)

AQUA KING™ II Standard Fresh Water Pump - 12 VDC, 3.0 GPMSHU..

$168.86

Seaflo 12V DC 1.2 GPM  35 PSI 21-Series Diaphragm Water Pressure Pump for Caravan/RV/Boat/Marine

Seaflo 12V DC 1.2 GPM 35 PSI 21-Series Diaphragm Water Pressure Pump for Caravan/RV/Boat/Marine

DATA: -Voltage: 12V DC;-Flow capacity: 1.2 Gallons per minu..

$33.99

SHURFLO 94-800-00 Model 4008 Complete Housing

SHURFLO 94-800-00 Model 4008 Complete Housing

Complete upper housing. Includes switch and bypass. Designed..

$39.38

Flojet 03526 144A Triplex Diaphragm 3526 Series Automatic Water System Pump

Flojet 03526 144A Triplex Diaphragm 3526 Series Automatic Water System Pump

Flojet 03526-144A Triplex Diaphragm Automatic Water System P..

$78.13 $92.00

SHURflo 94-009-10 12 V White Electric Faucet

SHURflo 94-009-10 12 V White Electric Faucet

Shurflo's finely crafted electric faucet for use in single f..

$62.75

SHURflo 244-3926 1/2" FPT X 1/2" Barb Elbow Swivel

SHURflo 244-3926 1/2" FPT X 1/2" Barb Elbow Swivel

Wingnut Swivel, Nylon: Pump head fittings included with each..

$4.99 $21.67

Shurflo 8005-733-155 Diaphragm Pump

Shurflo 8005-733-155 Diaphragm Pump

The SHURflo 8005-733-155 Demand Pump is ideal in application..

$164.38

Dynamic Head

The effect of the Earths gravity on the "lift" or head pressure is fairly simple; for every vertical foot of distance the pump moves the water you are adding one foot of head pressure so the ratio is a 1:1 ratio. The effects of the friction, caused by water as it travels through your hose or pipes, on the total head pressure is a little more difficult to calculate especially as there are slight variations in pipe friction in different hose materials and the smoothness of the inner bore. Basically. for every ten feet of pipe through which the water has to travel travel horizontally will contribute 1 foot of head height; the ratio of the pipe friction loss is a 10:1 ratio.

Plumbing fixtures and bends and corners in your hose also increase the total head you must calculate to ensure the proper final volume from your pump. Every corner with a 90 degree elbow in your plumbing will add 1 foot of head pressure  with a 1:1 ratio. 45 degree elbows, tees and even insert couplers can all have an impact on the final flow.

If you install a pump 40 feet away from the top of your waterfall which is 6 feet above the pump and the tubing is a single run of 40 feet horizontally then you add 4 feet of head for the tubing length (the 10:1 ratio) to the 6 foot differnetial between the pump location and the final height of the waterfall so your final total dynamic head calculation would be 10 feet. This means your final volume of water flow in this water feature or application would be the volume of flow on the performance curve that equaled the gallons per hour at 16 feet. This volume will certainly be much less than the initial volume the pump can move at an open flow or a zero head.

If in the above example your 40 feet of horizontal tubing run also required 3 elbows of 90 degrees then an additional 3 feet of theoretical head would be added and your final flow result would be at 19 feet on the performance curve of the pump. In this example you would want to choose a pump that has the desired GPH rating at 9 feet of head pressure.  Tubing size is also an important factor in accounting for head pressure loss, in general you should never reduce the diameter of the tubing below what the output size of the pump is, this will drastically increase head pressure, and reduce pump performance.  For maximum pump performance, using the largest tubing that is practical is the best choice. A best practice is to use a hose with an inner diameter that is the same as your pumps outlet fitting.