This high efficient fuel pump is an ideal equipment for quick and clean oil-changes.
It works great for pumping engine oil, diesel and heating oil.
About the installation, you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.
This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.

Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61''
Inlet Hose Outer Diameter: 6mm/0.236''
Inlet Hose Inner Diameter: 4mm/0.157''
Outlet Hose Length: approx. 124.5cm/49''
Outlet Hose Outer diameter: 12mm/0.472''
Outlet Hose Inner Diameter: 10mm/0.39''
Line Length: approx. 71cm/28''
Package Weight: approx. 1070g

Package Included:
1 x Fuel Transfer Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps

1. NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (fuel, petrol, etc.)
2. The working-period for this oil-extractor should not exceed 30 minutes.
  • 【APPLICATION】: Oil Diesel Extractor used in motorcycles, vans, cars, quads, industrial/ medical/ chemical equipment, water purification &treatment equipment, vehicle cleaning, agricultural spraying, etc.
  • 【FUNCTION】: Fuel Pump is suitable for pump engine oil, diesel, heating oil, water and other non-corrosive liquids.
  • 【SPECIFICATIONS】: Pump Dimensions: 5.1 x 5 x 3.3 inch, Input Voltage: 12V DC, Rated Current: 5A, Sound: 70 dB, Vibration: <2.5m/s2, Maximum Flow Rate: 1.5 L/min, Maximum Delivery Height: 2.3 ft.
  • 【COMPACT &PORTABLE】: With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump.
  • 【OPERATION】: The Oil Suction Gun can make oil simply drawing out the motor through the oil dipstick bore. Fluid Pump works by connecting the clamps to the car battery.

Write a review

Note: HTML is not translated!
    Bad           Good

Qiilu 12V 60W Oil/Diesel Fluid Sump Extractor

  • Brand: Qiilu
  • Product Code: QC02301
  • Availability: 20
  • $57.45

Dynamic Head

The effect of the Earths gravity on the "lift" or head pressure is fairly simple; for every vertical foot of distance the pump moves the water you are adding one foot of head pressure so the ratio is a 1:1 ratio. The effects of the friction, caused by water as it travels through your hose or pipes, on the total head pressure is a little more difficult to calculate especially as there are slight variations in pipe friction in different hose materials and the smoothness of the inner bore. Basically. for every ten feet of pipe through which the water has to travel travel horizontally will contribute 1 foot of head height; the ratio of the pipe friction loss is a 10:1 ratio.

Plumbing fixtures and bends and corners in your hose also increase the total head you must calculate to ensure the proper final volume from your pump. Every corner with a 90 degree elbow in your plumbing will add 1 foot of head pressure  with a 1:1 ratio. 45 degree elbows, tees and even insert couplers can all have an impact on the final flow.

If you install a pump 40 feet away from the top of your waterfall which is 6 feet above the pump and the tubing is a single run of 40 feet horizontally then you add 4 feet of head for the tubing length (the 10:1 ratio) to the 6 foot differnetial between the pump location and the final height of the waterfall so your final total dynamic head calculation would be 10 feet. This means your final volume of water flow in this water feature or application would be the volume of flow on the performance curve that equaled the gallons per hour at 16 feet. This volume will certainly be much less than the initial volume the pump can move at an open flow or a zero head.

If in the above example your 40 feet of horizontal tubing run also required 3 elbows of 90 degrees then an additional 3 feet of theoretical head would be added and your final flow result would be at 19 feet on the performance curve of the pump. In this example you would want to choose a pump that has the desired GPH rating at 9 feet of head pressure.  Tubing size is also an important factor in accounting for head pressure loss, in general you should never reduce the diameter of the tubing below what the output size of the pump is, this will drastically increase head pressure, and reduce pump performance.  For maximum pump performance, using the largest tubing that is practical is the best choice. A best practice is to use a hose with an inner diameter that is the same as your pumps outlet fitting.

eXTReMe Tracker