Pond Pumps Canada is part of the Amazon Affiliate Network. We may receive payment for items purchased through the Amazon website.

Product Description

800 GPH cartridge aerator livewell pump

Fills your livewell / bait tank with clean, oxygenated water to keep your catch healthy

Includes two different outlet hose tail configurations - Straight and 90°

Changing the oxygenation level helps to keep specific types of bait alive and active for a longer period of time

Stainless steel shafts suitable for fresh or salt water

Extra length for thicker transom

High-impact durable plastic housing

Extremely efficient, very low current draw and offer high capacity output

Water cooled long-life motors

Ignition protection to protect the pump against high current

Water/moisture tight seals

Silent and vibrationless operation

Anti-airlock protection

Includes comprehensive user manual with installation instructions

Beware of inferior non-genuine products on the market that claim to be just as good

Specifications

Voltage: 12V DC

Flow capacity: 800 Gallons per hour (3040 Liters per hour) - 51 Liters per minute Max. delivery head: 3.5 meters (height of vertical water flow up pipe)
Current draw: Only 2 Amp
Hose Outlet: 19mm (3/4")
Straight and 90° outlet hose tails
Dimensions: Length overall 207mm (8.15") x Cartridge diam 72mm (2.83")
Transom cutout hole: 27mm (1-1/16")
90° threaded intake, 125mm long
twin core wire lead, approx. 1m long
Approvals: CE
Applications
Typically used in boat hulls Livewells / bait tanks
These pumps are designed for intermittent use only, NOT designed for continuous use

  • The internal anti-airlock fins ensure even flow of water to your livewell Smaller profiles to fit in more confined spaces The cartridge is easy to remove for cleaning or replacement
  • Pump is fully submersible and utilizes tin-coated, 16-gauge wire for safety 90 threaded intake, 125mm long Includes two different outlet hose tail configurations - Straight and 90
  • Compact, efficient, long life motor Rustproof and corrosion resistant Stainless steel shafts suitable for fresh or salt water Extra length for thicker transom
  • High-impact durable plastic housing Extremely efficient, very low current draw and offer high capacity output Water cooled long-life motors
  • Ignition protection to protect the pump against high current Water/moisture tight seals Silent and vibrationless operation Anti-airlock protection

Write a review

Note: HTML is not translated!
    Bad           Good

Seaflo 12v 800gph Livewell Live Bait Tank Aerator Submersible Cartridge Boat Bilge Pump

  • Brand: Aidi
  • Product Code: SFBP1-G800-05
  • Availability: In Stock


Related Products

Amarine-made Automatic Submersible Boat Bilge Water Pump 12v 750gph Auto with Float Switch-New

Amarine-made Automatic Submersible Boat Bilge Water Pump 12v 750gph Auto with Float Switch-New

Amarine-made automatic bilge pump -750gph Compact, automati..

Dynamic Head

The effect of the Earths gravity on the "lift" or head pressure is fairly simple; for every vertical foot of distance the pump moves the water you are adding one foot of head pressure so the ratio is a 1:1 ratio. The effects of the friction, caused by water as it travels through your hose or pipes, on the total head pressure is a little more difficult to calculate especially as there are slight variations in pipe friction in different hose materials and the smoothness of the inner bore. Basically. for every ten feet of pipe through which the water has to travel travel horizontally will contribute 1 foot of head height; the ratio of the pipe friction loss is a 10:1 ratio.

Plumbing fixtures and bends and corners in your hose also increase the total head you must calculate to ensure the proper final volume from your pump. Every corner with a 90 degree elbow in your plumbing will add 1 foot of head pressure  with a 1:1 ratio. 45 degree elbows, tees and even insert couplers can all have an impact on the final flow.

If you install a pump 40 feet away from the top of your waterfall which is 6 feet above the pump and the tubing is a single run of 40 feet horizontally then you add 4 feet of head for the tubing length (the 10:1 ratio) to the 6 foot differnetial between the pump location and the final height of the waterfall so your final total dynamic head calculation would be 10 feet. This means your final volume of water flow in this water feature or application would be the volume of flow on the performance curve that equaled the gallons per hour at 16 feet. This volume will certainly be much less than the initial volume the pump can move at an open flow or a zero head.

If in the above example your 40 feet of horizontal tubing run also required 3 elbows of 90 degrees then an additional 3 feet of theoretical head would be added and your final flow result would be at 19 feet on the performance curve of the pump. In this example you would want to choose a pump that has the desired GPH rating at 9 feet of head pressure.  Tubing size is also an important factor in accounting for head pressure loss, in general you should never reduce the diameter of the tubing below what the output size of the pump is, this will drastically increase head pressure, and reduce pump performance.  For maximum pump performance, using the largest tubing that is practical is the best choice. A best practice is to use a hose with an inner diameter that is the same as your pumps outlet fitting.