100W Poly Solar Panel
Related power: 100W
Maximum/Peak Voltage(Vmp): 21.6V
Open Circuit Voltage(Voc): 18V
Maximum/Peak Current(Imp): 6.11A
Short circuit current (Isc): 5.55A
Output Tolerance: ±3%
Temperate coefficient of Isc: (0.10+/- 0.01) %/℃
Temperate coefficient of Voc: - (0.38 +/-0.01) %/℃
Temperate coefficient of power Voc: -0.47%/℃
Temperature range: -40℃~+80℃
Frame: Heavy duty aluminum
Guarantee of power: 90% within 10 years, 80% within 25 years
Defective Warranty:5 year warranty against material and workmanship
Kind of glass and its thickness: Low Iron, high transparency tempered glass of 3.2mm
SLA Battery Voltage: 12V
Size: 46.8*21.4*1.4in (1189*543*35mm)

24V Submersible Water Pump
Model: SFBP2-G96-08
Volt: 24V DC
Amps: 4 Max
Flow Rate(lph/gph): 360/96
Maximum Lift: 230 Feet (70 Meters)
Maximum Submersion: 100 Feet (30 Meters)
Package Size: 355*130*110mm
Net Weight: 2.9kg
Gross Weight: 3kg

15A PWM Charge Controller
Nominal output: 12V/24V
Max charger current: 15A
Max load current: 15A
Max solar panel: 270watt/540watt
Over charger protection: 14.5V/29V
Float charger: 13.8V/27.6V
Self consumption: 2mA/4mA
Size(inch): 4.35*2.33*1.3
Waterproof: IP22
Operating temperature: -20℃~+60℃
Net weight: 110g (0.24lbs)

Package Included:
2pcs 100 Watts Polycrystalline Solar Panels
1pc 24 Volts Submersible Well Pump
1pc 15A Solar Charge Controller
1pc 50Ft Black Solar Cable Adaptor
1pc Y MC4 Connector
  • This solar-powered pump kit is made up of highly efficient solar panel and submersible water pump. Start-up fast, efficient and strong stability.
  • As the power of the solar panel is depended on the sunlight, the pump is also affected by weather, seasons, places, etc.
  • Don't make the pump work without water for a long time, or its lifespan will be shortened. Clean the pump regularly.
  • For 4'' wells or larger. Suitable for pond, garden fountains, water circulation, etc.
  • One year warranty period. If you have any questions, please do not hesitate to contact us by email and we will do our best to solve the problems for you.

Write a review

Note: HTML is not translated!
    Bad           Good

ECO-WORTHY 2pcs 100 Watts Polycrystalline Solar Panel with 24V Submersible Well Pump & Mounting Kits for Water Fountain

  • Brand: ECO-WORTHY
  • Product Code: L07P100-SPCMW-2
  • Availability: 20
  • $686.74



Dynamic Head

The effect of the Earths gravity on the "lift" or head pressure is fairly simple; for every vertical foot of distance the pump moves the water you are adding one foot of head pressure so the ratio is a 1:1 ratio. The effects of the friction, caused by water as it travels through your hose or pipes, on the total head pressure is a little more difficult to calculate especially as there are slight variations in pipe friction in different hose materials and the smoothness of the inner bore. Basically. for every ten feet of pipe through which the water has to travel travel horizontally will contribute 1 foot of head height; the ratio of the pipe friction loss is a 10:1 ratio.

Plumbing fixtures and bends and corners in your hose also increase the total head you must calculate to ensure the proper final volume from your pump. Every corner with a 90 degree elbow in your plumbing will add 1 foot of head pressure  with a 1:1 ratio. 45 degree elbows, tees and even insert couplers can all have an impact on the final flow.

If you install a pump 40 feet away from the top of your waterfall which is 6 feet above the pump and the tubing is a single run of 40 feet horizontally then you add 4 feet of head for the tubing length (the 10:1 ratio) to the 6 foot differnetial between the pump location and the final height of the waterfall so your final total dynamic head calculation would be 10 feet. This means your final volume of water flow in this water feature or application would be the volume of flow on the performance curve that equaled the gallons per hour at 16 feet. This volume will certainly be much less than the initial volume the pump can move at an open flow or a zero head.

If in the above example your 40 feet of horizontal tubing run also required 3 elbows of 90 degrees then an additional 3 feet of theoretical head would be added and your final flow result would be at 19 feet on the performance curve of the pump. In this example you would want to choose a pump that has the desired GPH rating at 9 feet of head pressure.  Tubing size is also an important factor in accounting for head pressure loss, in general you should never reduce the diameter of the tubing below what the output size of the pump is, this will drastically increase head pressure, and reduce pump performance.  For maximum pump performance, using the largest tubing that is practical is the best choice. A best practice is to use a hose with an inner diameter that is the same as your pumps outlet fitting.

eXTReMe Tracker